Quick Start
Set the controls as shown:
1. Check Play/Edit Switch
Be sure the Play/Edit switch is set to “Play.”
2. Plug In
Connect the Onboard Aura into your amplifier or PA with a 1/4
inch instrument cable.
3. Tune Up
Press the Tuner button. The output will mute when the tuner is
engaged. To exit, press the Tuner button again.
4. Select
Increase the volume to a comfortable level, and use the Image
Select knob to browse through the Acoustic Sound Images.
Refer to the Acoustic Sound Image Reference Chart online
to identify the microphone (and placement) associated with
each Sound Image.
http://www.martinguitar.com/guitars/reinforcements/userguides.html
5. Blend
Move the Blend slider to mix in some pickup signal with the Sound
Image.
3
Onboard Aura
™
Image Select:
#1
Volume:
Seven o’clock
Blend:
Set to “Aura”
Bass, Mid, Treble:
Centered (at detent)
Anti-Feedback:
Off
Play/Edit:
Set to “Play”
