3
Setup
Tuck the cable into the cable strain relief opening. Allow for some slack so that
the cable is not bent at the underside of the pickup housing. With the guitar’s
strings in place, slide the Neo-Buster under the strings until it drops into the
soundhole, parallel to the end of the fi ngerboard. You may need to release some
string tension in order to allow the Neo-Buster to install more easily.
Travel / Storage
We have carefully engineered Neo-Buster with materials designed to reduce
interaction with most guitar fi nishes. However, we recommend removing the
Neo-Buster from your guitar if you store the instrument for long periods. If the
rubber cable comes to rest on the guitar’s fi nish while the instrument is stored, it
may interact with the lacquer and leave a permanent mark.