Fishman NASHVILLE Series Скачать руководство пользователя страница 2

www.fishman.com

www.fishman.com

Spider-Style Resophonic

The Nashville Series resophonic pickup for spider-

style bridges features a piezo-ceramic element 
preinstalled in the saddles. The saddles should fit 
tightly into the saddle slot in the spider bridge as 
shown (Figure 1).

Fit the saddles by your preferred method, with the 
maple side towards the cone, and the top notched 
for string spacing. Both the top and bottom of these 
saddles can be adjusted for proper fit and playability. 

Take special care not to damage the wires leading 

from the pickup during adjustment.

Drill a hole for the jack in your preferred location, 
usually in the treble side of the lower bout for metal 
bodied instruments, or in the endblock, centered 
below the tailpiece, for wooden bodied instruments.

Metal Bodied Instruments (sidemount location): 
Use a center punch at the chosen location and use a 
sharp 3/8” (9.5mm) drill.

Wooden Bodied Instruments (endblock location): 
Drill a 3/16” (4.8mm) hole and enlarge it to 15/32” 
(12mm) with a 15/32” tapered reamer. Note that if 
the instrument has a ring (“soundwell”) inside the 
sound chamber, you may have to drill through it to 
accommodate the jack.

Drill a 3/16” hole in the corner edge of the 
soundwell near or under the tail piece so that it is 
hidden when you reinstall the coverplate (Figure 2). 
Pass the pickup wire through and wire the pickup 
leads to the jack as shown (Figure 3).

Install the jack hardware (Figure 4) in the chosen 
location.

Figure 1.

6

1 2 3

4

5

Metal Body Instrument Jack Location

Wooden Body Instrument Jack Location

1 - 3/8” Nut 

2 - 3/8” Star Washer

3 - Guitar Body

4 - 3/8” Dress Washer

5 - 3/8” Nut

1 - 15/32” Nut

2 - 15/32” Washer 

3 - 15/32” Star Washer   

4 - Guitar Endblock

5 - 3/8” Dress Washer

6 - 3/8” Nut

1 2 3

4 5

Figure 5.

Shield to

Sleeve

Pickup Signal

to Tip

Figure 3.

Figure 2.

Figure 4.

Note: 

The External Ground Wire should be utilize 

when pickup is installed on a wood body instrument 
Use one of the cover mounting screws to secure ground 
wire between the cover and the instrument body.

Отзывы: