Guidelines for selecting the kickstand angle:
45 Degrees
The first click-stop on the kickstand angles the cabinet back 45 degrees,
which is useful when you stand about three to five feet (1 to 1.5 meters)
from the Loudbox.. This angle is also useful when you perform sitting down
next to the amplifier.
57 Degrees
The second click-stop angles the cabinet back 57 degrees. Use this position
when you stand about 1 to 2 feet (30 to 60 cm) from the Loudbox.
70 Degrees
When space is very limited onstage and you must stand directly over the
Loudbox, set the kickstand at the third click-stop to a 70 degree angle.
Warning:
Do not pick the amp up by the kickstand!
For safe operation, use the kickstand only on solid, level ground.
QUICK START
Please read your Owner’s Manual before powering up your Loudbox. Here’s what you need to do to plug
in and play.
If your amplifier has an operating voltage of 120V, plug the provided AC line cord into the back of the
amplifier. For an amplifier that operates at 240V you must supply your own detachable power cord. The cord
you supply must have an IEC style 320 connector at one end, and a male AC plug appropriate for your area
at the other.
1.
Make sure the Loudbox is switched
OFF
.
2.
Plug the Loudbox into an electrical outlet with the appropriate AC voltage.
3.
Push the Mute switch to the
IN
position and make sure the Volume is turned down.
4.
Connect your acoustic instrument to the Input of the Loudbox with a shielded 1/4”
cable.
Suggested Settings:
5.
Turn the Loudbox on.
6.
Push the Mute switch to the
OUT
position and slowly turn the volume knob up to
the desired volume level.
If your pickup system has a volume control, turn it up a high as possible without
causing the amp to distort.
TM
4
9
NOTE:
Do not defeat the ground prong on the AC cable; the safe operation of this
amplifier depends on a proper ground connection.
Содержание Loudbox
Страница 2: ...Tested To Comply With FCC Standards Loudbox FOR HOME OR OFFICE USE TM...
Страница 11: ...11...
