background image

The FISHMAN AGP-2 Onboard Acoustic Guitar Preamp is warranted to function for
a period of One (1) Year from the date of purchase. If  the unit fails to function
properly within the warranty period, free repair and the option of replacement or
refund in the event that FISHMAN is unable to make repair are FISHMAN’s only
obligations. This warranty does not cover any consequential damages or damage to
the unit due to misuse, accident, or neglect. FISHMAN retains the right to make
such determination on the basis of factory inspection. Products returned to
FISHMAN for repair or replacement must be shipped in accordance with the Return
Policy, as follows. This warranty remains valid only if repairs are performed by
FISHMAN. This warranty gives you specific legal rights and you may also have
other rights which may vary from state to state.

Return Policy

To return products to FISHMAN TRANSDUCERS, you must follow these steps...

1.  Call FISHMAN TRANSDUCERS at 978-988-9199 for a Return Authorization
Number (“RAN”).

2.  Enclose a copy of the original Bill of Sale as evidence of the date of purchase,
with  the product in its original packaging and a protective carton or mailer.

3.  FISHMAN TRANSDUCERS’ technicians will determine whether the item is
covered by warranty or if it instead has been damaged by improper customer
installation or other causes not related to defects in material or workmanship.

4. Warranty repairs or replacements will be sent automatically free of charge.

5. If FISHMAN TRANSDUCERS determines the item is not covered by warranty, we
will notify you of the repair or replacement cost and wait for your authorization to
proceed.

F

I S H M A N

T

R A N S D U C E R S

340-D Fordham Road Wilmington MA 01887 USA

Phone 978-988-9199 • Fax 978-988-0770

www.fishman.com

009-061-001 6-00

L i m i t e d   W a r r a n t y

L i m i t e d   W a r r a n t y

®

Содержание AGP-2













Отзывы: