background image

Page 5

For technical questions, please call 1-888-866-5797.

Item 62675 

        

General Operating Instructions

SONAR (SOund Navigation And Ranging) works by sending out a specific audio signal 

that bounces off objects and is then read by the unit to provide a graphic display.

CAUTION:

 The Transducer can be used directly in the water to look for 

Fish, but the Display unit should never be immersed.

1.  Press the

 POWER

 button on the back of 

the unit to turn the Fish Finder on.

2.  Adjust the unit viewing angle with hinge.

3.  Press the 

MENU

 button to bring up the Functions 

Menu, then press the Right or Left Arrows to cycle 

through options. Press 

SELECT

 to choose an option.

4.  Options include:

a.  Depth Range (“4-10ft” and “10-99ft”). Allows 

manual selection of a specific depth to scan. If the 

depth of the water is greater than the depth range 

setting, the bottom will not be visible on screen.

b.  Auto Detect. Updates the reading of 

the landscape every ten seconds

c.  Sensitivity. Adjusts the level of sonar returns 

shown on the Display.  A higher number will yield 

more returns and find more fish, whereas a lower 

number will remove clutter from the Display.  The 

Fish Finder will not work well in areas where 

the water is especially murky or stirred up.

d.  LED Backlight Functions, allows the backlight to 

be turned on or off.  Continuous operation of the 

backlight significantly decreases battery lifespan.

e.  Speaker volume (which may be 

silenced when a fish is detected).

f.  Scale Indicator. Used to see where (within 

the selected range) the fish may be found.

1st Line
2nd Line

Figure E:  Fish Location

5.  The Depth Meter in the lower right corner will appear 

after the unit is powered on. Stone symbols will 

indicate the shape of the landscape under water. 

Figure F:  Depth Meter Landscapes

6.  The size and number of the fish symbols 

indicates the size and number of fish.

Figure G:  Big Fish

Figure H:  Small Fish

Figure I:  A Group of Fish

7.  An alarm will sound to indicate a group of fish.

8.  To prevent accidents, turn off Fish Finder 

after use.  Clean, then store the unit 

indoors out of children’s reach.

 

Содержание 62675









Отзывы: