Fisher Minute Mount 2 LD Series, Руководство по установке

Страница: 2 / 12

November 5, 2003 2 Lit. No. 26182
27750 LD
SAFETY DEFINITIONS
Read these instructions and labels on the snowplow
before beginning installation.
NOTE: Identifies tips, helpful hints, and
maintenance information the owner/operator
should know.
WARNING/CAUTION AND INSTRUCTION
LABELS
Become familiar with and inform users about the
warning labels on the back of the blade, and the
instruction label on the headgear.
Warning/Caution Label
Attachment
Arm
Jack
Lock
Headgear
Jack
(fully raised)
Jack (lowered)
Pin Release
Handle
(lowered)
Connecting
Pin
Pushplate
Jack
Stop
Pin Release
Handle (raised)
AT
T
A
C
H
DET
A
CH
27451
1. Push Pin
Release
Handle
down to pull
out Connecting Pins.
2. Drive vehicle slowly to engage
Pushplates into Attachment Arms .
3. Stand in front of blade. Fully raise Pin Release
Handle to release Connecting Pins.
4. Push Headgear toward vehicle to allow
Connecting Pins to fully engage Pushplates .
5. Pull out Jack Lock . Push Pin Release Handle
into Stop .
6. While holding Jack Lock out, use Jack Handle to
raise Jack fully. Release Jack Lock.
7. Attach all electrical connectors.
U.S Patents 4,280,062; 4,999,935; 5,353,530; 5,420,480; RE 35,700; 6,253,470;
CAN Patent 2,060,425; and other patents pending.
Read Owner's Manual For Complete Instructions
1. Place control in Lower/Float to put blade
down.
2. Pull and hold Jack Lock out. Jack will drop
to ground. Then pull Pin Release Handle
away from Stop and Jack Lock. Release
Jack Lock .
3. Stand in front of blade. While pushing
Headgear toward vehicle with left hand, push
Pin Release Handle down to disengage
Connecting Pins . Make sure Connecting
Pins are fully retracted.
4. Detach all electrical connectors.
WARNING
Indicates a potentially hazardous situation, that
if not avoided, could result in death or serious
personal injury.
CAUTION
Indicates a situation that, if not avoided, could
result in damage to product or property.
Instruction Label