LCD Displays:
NOTCH:
OFF - No NOTCH selected.
FOIL NOTCH
NICKEL NOTCH
PULL TAB NOTCH
ZINC PENNY NOTCH
8
3. The NOTCH button enables you to select between the NOTCH
discrimination options. Push this button repeatedly to select from:
The NOTCH mode is only active if you are in the DISC mode (not
ALL METAL). If a NOTCH is activated, the LCD “NOTCH” icon will
stay on.
CONTROL PANEL
13
ADDITIONAL FEATURES
AUTOMATIC LOW BATTERY WARNINg:
The ID EDGE will let you know
when a low battery condition will begin to effect performance
— the batteries must be changed at this time. When the batteries
get too weak, the audio system will produce a wavering tone
to alert you to the low battery condition, and the LCD will flash
“LO”.
AUTOMATIC SIgNAL OVERLOAD WARNINg: The ID EDgE will alert
you to the presence of a large metal object in close proximity to
the search coil by sounding off an audio bell tone. This lets you
know that the object is too close to the coil for the 4-tone audio
or LCD systems to accurately identify the object.
CONSTANT CONTROL READOUT:
Unlike many digital detectors, the
ID EDGE LCD shows you the control settings at all times while in
the search mode. The control icons are similar to the knobs of
older detectors, constantly showing where the settings are at in
one easy glance. In addition, even more accurate information
regarding the control settings can be obtained by entering the
MENU mode and observing the two-digit number accompanying
each control, showing improved resolution of each control.
IDedgeManual-8730024 .indd 8
6/13/06 3:09:09 PM
