manualshive.com logo in svg

Fisher Homesteader Personal Plow, Руководство пользователя

Поделиться
Скачать
Fisher Homesteader Personal Plow Скачать руководство пользователя страница 17

Lit. No. 48593, Rev. 00 

11 

August 15, 2009

TRANSPORTING SNOWPLOW

These instructions are for driving short distances. 
Remove the snowplow from the vehicle for long trips.

1.  Completely raise the blade.

2.  Adjust the blade height for maximum headlamp 

illumination.

3.  Adjust the blade to the straight position.

4.  Move the control ON/OFF switch to OFF to lock 

blade in place.

NOTE: Overheating is unlikely under normal 
driving conditions, but occasionally the snowplow 
may be positioned so it de

fl

 ects air away from the 

radiator. If this occurs, stop the vehicle and raise, 
lower or angle the snowplow slightly to correct 
overheating.

NOTE: Only the driver should be in the vehicle cab 
when the snowplow is attached.

 WARNING

Position blade so it does not block headlamp 
beam.
Do not change blade position while traveling. 
You could suddenly lower blade accidentally.

DRIVING AND PLOWING ON SNOW 
AND ICE

Refer to vehicle owner's manual instructions for 
driving in snow and ice conditions. Remember, when 
you drive on snow or ice, your wheels will not get good 
traction. You cannot accelerate as quickly, turning 
is more dif

fi

 cult and you will need longer braking 

distance.

Wet and hard packed snow or ice offers the worst tire 
traction. It is very easy to lose control. You will have 
dif

fi

 culty accelerating. If you do get moving, you may 

have poor steering and dif

fi

 cult braking which can 

cause you to slide out of control.

Here are some tips for driving in these conditions:

• Drive defensively.

•  Do not drink, then drive or plow snow.

•  Plow or drive only when you have good visibility 

for operating a vehicle.

•  If you cannot see well due to snow or icy 

conditions, you will need to slow down and keep 
more space between you and other vehicles.

•  Slow down, especially on higher speed roads. 

Your headlamps can light up only so much road 
ahead.

•  If you are tired, pull off in a safe place and rest.

•  Keep your windshield and all glass on your vehicle 

clean to see around you.

•  Dress properly for the weather. Wear layers of 

clothing, as you get warm you can take off layers.

 CAUTION

Drinking then driving or plowing is very 
dangerous. Your re

fl

 ex, perceptions, 

attentiveness and judgement can be affected 
by even a small amount of alcohol. You can 
have a serious or even fatal collision if you 
drive after drinking. Please, do not drink and 
then drive or plow.

 CAUTION

Transport speed should not exceed 45 mph. 
Further reduce speed under adverse travel 
conditions.

OPERATING YOUR SNOWPLOW

Содержание Homesteader Personal Plow





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды