
Instruction Manual
D103312X012
GX 3-Way Valve and Actuator
July 2017
19
Parts Ordering
Each valve is assigned a serial number which can be found on the valve or on the nameplate (figure 2 and key 35, not
shown). The nameplate will normally be fitted to the actuator. Refer to this serial number when contacting your
or Local Business Partner for technical assistance. When ordering replacement parts refer to this
serial number and give the part description from the following parts list.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts Kits
Packing Kits
PACKING
KITS
Valve Size
Stem Diameter
DN 25 and 40 (NPS 1 and 1‐1/2)
10 mm
DN 50, 80 and 100 (NPS 2, 3 and 4)
14 mm
ENVIRO-SEAL PTFE packing (Contains keys 32 and 33)
RGXPACKX012
RGXPACKX022
ENVIRO-SEAL Graphite ULF packing (Contains keys
42, 43, and 44)
RGXPACKX052
RGXPACKX042
Actuator Kits
ACTUATOR
KITS
Actuator Size
225
750
Actuator (Contains keys 10, 15, 19, 109, and 20)
RGX225X0022
RGX750X0032
Bottom‐Port Common Seal Kits
BOTTOM‐PORT
COMMON
SEAL KITS
(1)
Valve Size
DN 25
(NPS 1)
DN 40
(NPS 1‐1/2)
DN 50
(NPS 2)
DN 80 and 100
(NPS 3 and 4)
Nitrile (Contains keys 37 and 38)
RGX3WAYX012
RGX3WAYX042
RGX3WAYX072
RGX3WAYX102
Ethylene Propylene (EPDM) (Contains keys 37 and 38)
RGX3WAYX022
RGX3WAYX052
RGX3WAYX082
RGX3WAYX112
FKM Fluorocarbon (Contains keys 37 and 38)
RGX3WAYX032
RGX3WAYX062
RGX3WAYX092
RGX3WAYX122
1. A Gasket Kit is required when replacing the seals.
Bonnet and Cage O‐Rings (not used on HT constructions)
BONNET AND
CAGE O‐RINGS
(1)
Valve Size
DN 25
(NPS 1)
DN 40
(NPS 1‐1/2)
DN 50
(NPS 2)
DN 80 and 100
(NPS 3 and 4)
Nitrile O‐ring (Contains key 81)
GE29466X012
GE29467X012
GE29468X012
GE29469X012
Ethylene Propylene O‐ring (EPDM) (Contains key 81)
GE29466X022
GE29467X022
GE29468X022
GE29469X022
FKM Fluorocarbon O‐ring (Contains key 81)
GE29466X032
GE29467X032
GE29468X032
GE29469X032
1. The bonnet O‐ring applies to Side‐Port Common trim. The cage O‐ring applies to Bottom‐Port Common trim.
Seal Rings (HT Construction Only)
SEAL RINGS
Valve Size
DN 25
(NPS 1)
DN 40
(NPS 1‐1/2)
DN 50
(NPS 2)
DN 80 and 100
(NPS 3 and 4)
Graphite Seal Ring (Contains key 107)
GE49062X012
GE49063X012
GE49064X012
GE49065X012
Gasket Kits
GASKET
KITS
Valve Size
DN 25
(NPS 1)
DN 40
(NPS 1‐1/2)
DN 50
(NPS 2)
DN 80
(NPS 3)
DN 100
(NPS 4)
Body / Bonnet Gasket Kit
(Graphite Laminate)
(Contains key 5)
GE00078X012
GE00079X012
GE00080X012
GE00052X012
GE00052X012