Fisher Design EAD series Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 40

Fisher Design EAD series Скачать руководство пользователя страница 40

Design ED & EAD Class 125-600

40

Figure 24. Gasket Set Detail

RESTRICTEDĆTRIM DETAIL

16A1943-A / DOC

30A9542-F / DOC

FULLĆCAPACITYĆTRIM DETAIL

For information, contact Fisher:
Marshalltown, Iowa 50158 USA
Cernay 68700 France

Sao Paulo 05424 Brazil
Singapore 128461

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express

or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

Printed in U.S.A.

E

Fisher Controls International, Inc. 1973, 2001; All Rights Reserved

C-seal is a mark owned by Pressure Science, Inc. easy-e, ENVIRO-SEAL, Fisher, Fisher-Rosemount, HIGH-SEAL, WhisperFlo, and Whisper Trim are marks owned by Fisher Controls
International, Inc. or Fisher-Rosemount Systems, Inc. All other marks are the property of their respective owners. This product may be covered by one or more of the following patents:
5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents.

«
...
38
39
40

Содержание Design EAD series









































Отзывы:

Нет отзывов