PINPOINTING/DEPTH READING
Pushbutton Pinpoint Mode
Target location is quick and easy using the SEARCH/
PINPOINT touch pad. And when you pinpoint your
target, your CZ-7a Pro will give you an approximate
(usually within an inch or so) depth reading for
coin-sized targets. It doesn't matter which mode
you're in (ID. or Autotune), and you don't have to keep the
search coil in motion to get a response as long as the SEARCH/
PINPOINT pad is pressed.
1.
Once the presence of a target is indicated by
the "beep-beep" of your CZ-7a Pro, simply move
the coil at least 1 foot away from the target area
(and any other metal), and set it lightly on the
ground.
2.
Press and hold the SEARCH/PINPOINT pad.
After a brief pause, a scale from 0 to 10, a
MARKER and the word "INCHES" will appear on
the LCD.
3.
Still pressing the SEARCH/PINPOINT touch pad,
bring the search coil back over the target area.
Note that as you approach the target, the
volume and pitch increase. Also, the marker will
indicate signal strength and approximate depth.
The farther to the right the marker goes, the
weaker the signal and the deeper the target.
4.
Slowly move the coil from left to right, forward
and backward over the target, until you can
determine exactly where you get the strongest
response as indicated by volume., pitch and LCD
marker.
5.
With your thumb still on the SEARCH/PINPOINT
pad, stop the coil and rest it lightly on the ground.
6.
Note the position of the LCD marker. If, for
example, the marker is over the 4 (and your
target is coin-sized), your target should be about
4 inches below the center of your search coil.
7.
If you're more interested in finding your target
31
