B a t t e r i e s
Use 9-Volt ALKALINE battery only (included)
Low Battery Alert
The Yellow LED indicator light will illuminate and remain illuminated before the batteries
are discharged to the point at which the detector has lost any of its metal detecting
range.
In order to guarantee maximum detection at all times, replace battery as soon as yellow
light illuminates.
The detector will continue to operate, at a lower sensitivity, after the Low Battery
Indicator is illuminated. Replace batteries as soon as possible after the indicator
illuminates.
If you plan to store the CW20™
for several days or more,
remove the battery.
YELLOW LED
Low Battery
Indicator
Battery
Chamber
First Time Operation
To Operate the Detector,
1) Install the Battery
a. Use a 9-volt ALKALINE battery only (included)
b. Install battery with correct polarity
(align "+" on detector housing with "+" on battery)
c. The battery cover opens and closes with a coin or screwdriver
2) Set the On switch to "ON"
"ON" is the middle position
3) Select Audio or Vibrate Mode
4) Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal
5) Read this manual for proper training in the detection of metal objects
“
+
” Polarity Side for Battery
●
+
