Fisher 800-B, Инструкция по эксплуатации и гарантия, Страница: 10 / 19

0
will that in your system
a n d ''pull" i n unison, instead of in upposition--an important
consideration in achieving the good low
frequency sound.
OPERATING
is ready for like a n y other fine
Y
of electronic equipment. operated correctly in
order to its capabilities. you to read these
instructions carefully in order results.
Volume
The:
control regulates the total volume of sound from
the speakers. The
AC
Power switch is combined with this control,
a n d the is turned
off a t the
left position.
This
switch also controls the
two power
on the rear panel.
The
control the sound f r o m channels simul-
taneously. t h u s making it unnecessary to t h e channels each
you change the volume.
Contour
Switch
The
Loudness Contour switch is compensation for
natural deficiency of
the i n the bass and
ranges a t low With
i n the
O N
position,
an of high tones is added
the control is turned
resulting
in a
natural sound a t low volume levels,
Selector Switch
positions
of
the Selector perform the
functions :
TAPE HEAD:
tape deck connected to the
TAPE HEAD
jacks a n d provides equalization for tapes played at a speed
of
and
inches per second.
PHONO: Selects a record player to the
PHONO
jacks and
provides correct equalization for all records made since
1954.
MPX
FILTER:
Used for listening to multiplex programs from
weak stations. T h e
of
the noise without
restricting
the
of the music signal.
The Stereo
Beam tuning eye
will
automatically indicate when a multiplex
program is broadcast.
MPX STEREO:
This position is
used
for Iistening to multiplex
casts stronger stations.
The
Stereo Beam
also operates the
Selector in this position.
FM:
This position
is
'for listening to monophonic
FM
a n d for in an
Fhl
station.
FM-AM STEREO:
T h i s is the position for listening to stereo
programs. T h e
FM
station will be heard on the left speaker and
the station will heard on the right.
AM:
programs be heard by turning the
Selector to this position.
AUX: This position selects a component connected to the
AUX
jacks
on
panel.
TAPE:
Selects a tape recorder for playback of previously recorded
tapes.
This
position is not used while making
a
recording.
Balance
control is used to equalize the sound levels from both speaker
systems to achieve the optimum stereo effect.
If the Channel
A and
Channel inputs a r e exactly balanced, you will sound
levels from the left a n d right speakers with t h e control in the