11
4. Connect the power supply cables from the electrophoresis unit by inserting
the red lead (+) into the red power supply output and the black lead (-) into
the black power supply output beneath the front fascia plate.
4.3 To use the constant voltage or current mode
* Press the
or
buttons to set a constant voltage or current
respectively.
5. Press the
or
buttons to adjust the voltage or current in 1V or
1mA increments or decrements to the required output value.
6. After adjusting your constant mode output value (e.g. voltage), set the other
parameter to the maximum output (e.g. current).
4.4 To adjust the time
7. After setting the desired current or voltage output value, press the
button, and then press
key or
key to adjust timer accordingly.
For non-stop continuous operation, set the
b
utton to ‘zero’.
4.5 Starting and stopping the run
8. Press the
key to start the run. Once the electrophoresis run starts,
the LED light will light up next to the
button.
