28
Chapter 5 | Measurements
•
Empty commands (i.e. just a <CR>) will be ignored
and a new prompt will be issued.
•
<CR> (Carriage Return, ASCII 13) is used to
terminate a command. Whenever this character is
received, the internal buffer will be processed.
•
Remote commands are not case sensitive.
Remote Command: GETMEAS <CR>
Prints the current measurement immediately.
Remote Command: GETMEAS Data Count <CR>
Example: GETMEAS 2. Prints the current measurement for
a set number of times.
Remote Command: GETCAL <CR>
Prints all current calibration data. If no calibration is saved,
returns “>” to receive next command.
Remote Command: GETCAL MODE <CR>
Example: GETCAL COND. Prints the calibration data for
specific mode. MODE: COND or SALT or TDS
Remote Command: GETLOG <CR>
Prints all logged measurement data. If no data is logged,
returns “>” to receive next command. Output format is
based on the Log Export Type setting.
Remote Command: SYSTEM <CR>
Prints the system information including meter model, serial
number, software version, date and time.
Remote Command: SETCSV <CR>
Sets the output format to Comma Separated Values (CSV).
Remote Command: SETKEYLOCK NUMBER <CR>
Example: SETKEYLOCK 1. Locks or unlocks the meter
keypad. NUMBER = 1 (lock) or 0 (unlock).
Remote Command: SETRTC YYYY-MM-DD-HH-
MM-SS-TIMEMODE <CR>
Example: SETRTC 2021-08-19-01-32-00-1. Sets the date
(YYYY-MM-DD format) and time (12 hour format) for the
meter. TIME MODE = 1 (PM) or 2 (AM).
Remote Command: SETMODE MODE <CR>
Example: SETMODE COND. Sets the meter measurement
mode. MODE: COND or SAL or TDS
Remote Command: GETMODE <CR>
Prints the active measurement mode.
Содержание Fisherbrand accumet AB330
Страница 2: ......
