4
Battery Safety
Information
Care
Battery Installation
• Locate the battery compartment door
on the electronic toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Insert four “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If this toy begins to operate
erratically, you may need to reset the
electronics. Slide the power/volume
switch off and then back on.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries.
• Machine wash the mat in cold water
on the gentle cycle. Do not use bleach.
Tumble dry low.
• Wipe the arches, hub and toys with
a clean cloth dampened with a mild
soap and water solution. Do not
use bleach.
• Do not immerse the electronic toy.
In exceptional circumstances, bat-
teries may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2002/96/
EC). Check your local authority
for recycling advice
and facilities.
1,5V x 4
“AA” (LR6)
