Battery Installation
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
“AA” (LR6)
• Locate the battery compartment on the
back of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove it.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
• When sounds or light become faint or
stop, it’s time for an adult to change
the batteries!
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Care
• Wipe the toy and figures with a clean
cloth dampened with a mild soap and
water solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
