Battery
Replacement
For best performance, we recommend
replacing the batteries that came with this toy
with three new “AA” (LR6) alkaline batteries.
• Locate the battery compartment on the
bottom of the toy. Loosen the screws
with a Phillips screwdriver and remove
the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three new “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door and
tighten the screws. Do not over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety
Information
1,5V x 3
“AA” (LR6)
