Battery Replacement
• Protect the environment by not
disposing of this product with
household waste (2002/96/
EC). Check your local authority
for recycling advice and
facilities (Europe only).
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
Do not mix old and new batteries or
•
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Insert batteries as indicated inside the
•
battery compartment.
Remove batteries during long periods
•
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
Never short-circuit the battery terminals.
•
Use only batteries of the same or
•
equivalent type, as recommended.
Do not charge non-rechargeable
•
batteries.
Remove rechargeable batteries from
•
the product before charging.
If removable, rechargeable batteries
•
are used, they are only to be charged
under adult supervision.
Battery Safety
Information
1,5V x 2
"AA" (LR6)
• Locate the battery compartment on the
bottom of the saw.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert two, new “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and replace
them in the toy.
• When the sound becomes faint or stops,
it’s time for an adult the change
the batteries.
