7
Starting the Swing
Room-to-Room Portability
• Place your child in the seat and secure properly.
• Slide the power switch ON
•
.
• Give the seat a light push to start the swinging motion. Adjust
the speed switch to the desired swing motion setting.
Hints:
- After turning on power, this product may not swing unless
there is a child in the seat.
- As with most battery-powered swings, a heavier child will
reduce the amount of swinging motion on all settings. In most
cases, the low setting works best for a smaller child while the
high setting works best for alarger child.
- If the low setting provides too much swinging motion for your
child, try placing one end of a blanket underneath your child
and let the other end of the blanket drape down while swinging.
- If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
• Be sure to turn this product off when not in use. Slide the power
switch OFF .
Power Switch
Speed Switch
To prevent serious injury or death
from falls and being strangled in the
restraint system
, never use on any
elevated surface.
• Make sure your child is properly secured in the swing seat.
• Grasp both handles, as shown, and lift.
• Carefully carry the swing to another room. Be sure to set the
swing down on
a non-elevated, flat surface
.
WARNING
