• Position the base upside down on a flat surface
with the straight edge of the base facing you.
• Position the playmat upside down with the
straight edge of the playmat facing the base.
• Fit the three button holes in the playmat onto
the corresponding buttons on the base.
• Insert and snap the tabs on the rainbow back-
board into the slots in the base.
• Insert and snap the flowers into the the base.
• Fit one of the the pegs at the center of the
block rocker into a hole in the base. Press to
snap the other peg on the block rocker into
the hole in the base.
Assembly is now complete.
Assembly
3
3
3
1
1
2
2
• Insert the fastener at one end of the playmat
under and around the tab on the base and
secure it.
• Repeat this procedure to attach and secure the
fastener on the opposite side of the playmat.
• Turn the base and playmat assembly upright.
Tab
Fastener
Playmat
Base
• Stack the blocks on any of the pegs on the base.
• Press the “magic-action” button on the base to
bring a colorful activity “garden” to life with sound,
lights and lots of twirling fun!
Note: If Twirlin’ Whirlin’ Garden
™
does not respond
when the “magic action” button is pressed, it’s time
to replace the batteries!
“Magic-Action”
Button
Blocks
Blocks
It’s Playtime!
Playmat
Buttons
Holes
Base
Rainbow
Backboard
Flowers
Block
Rocker
Base
Bottom View
Bottom View
