• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
Seat
Hint:
The seat can be attached to the frame in any of three
positions, depending on the size of your child. Check
your child’s fi t on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label fi rmly with a cloth to
make sure the label is adhered to your vehicle.
Lower Position
Middle Position
Upper Position
Tabs
Slots
Seat
Retainer
3
5
Label Decoration
Attaching the Seat
6
10
13
(Place label 11 on
opposite side of seat)
(Place remaining
label 1’s on
opposite side of
front wheel)
(Place label 6
on opposite side)
8
12
(Place label 7
on opposite side)
1
9
(Place label 4
on opposite side)
4
2
(Place label 13
on opposite side)
SIDE VIEW
DASH VIEW
