• Pull the footrest forward.
• Locate the lock knobs on each end of the footrest.
• Pull the lock knobs down
and then slide them out
. The
lock symbol
should be visible on both lock tab. The
footrest locks for high chair use.
• Check to be sure the seat is secure for high chair use:
- Push the seat bottom down with your hand. The seat
should not move.
- Push the footrest back. The footrest should not move.
Swing 'n Meals
™
is now ready for high chair use.
To tighten the waist restraints:
• Feed the anchored end of the waist restraint up through the
buckle to form a loop
.
• Pull the free end of the waist restraint
.
• Repeat this procedure to tighten the other waist restraint.
To loosen the waist restraints:
• Feed the free end of the waist restraint up through the
buckle to form a loop
.
• Enlarge the loop by pulling on the end of the loop toward
the buckle.
• Pull the anchored end of the waist restraint to shorten the
free end of the waist belt
.
• Repeat this procedure to loosen the other waist restraint.
High Chair Setup and Use
10
4
Lock Knob
Pull
Down
Push
Out
The child should be secured in the
product at all times by the restraining
system. The restraint belts must be
adjusted to fit your child snugly. The
tray is not designed to hold the child in
the chair.
WARNING
Restraint Use
• Place your child in the seat.
• Pull the crotch restraint up between your child’s legs and
fasten both waist restraints to the crotch restraint.
Make
sure you hear a “snap” on both sides.
5
Hint:
Choose which side of the reversible pad you would like
to use. Refer to assembly steps 10 and 11 (on page 6) to attach
the pad.
Tighten
Loosen
Anchored End
Buckle
Buckle
Anchored End
Free End
Free End
Footrest
Lock
Knob
Waist Restraint
Waist Restraint
Crotch Restraint
79739b-0920.qrk 10/25/01 11:11 PM Page 10
