background image

Battery Replacement

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn 
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard 

(carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted

batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.

• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under 

adult supervision.

1.5V x 2

“AA” (LR6)

Battery Safety Information

For best performance, we recommend replacing the batteries that came with this toy 
with two, new “AA” (LR6) alkaline batteries.

• Locate the battery compartment on the bottom of the toy.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. 

Remove the battery compartment door.

• Remove the exhausted batteries and throw them away.
• Insert two “AA” (LR6) 

alkaline

 batteries.

Hint:

 We recommend using 

alkaline

 batteries for longer battery life.

• Replace the battery compartment door and tighten the screws. 
• If this toy begins to operate erratically, you may need to reset the electronics. 

Remove the batteries and replace them.

• When sounds become faint or stop, it’s time for an adult to change the batteries!

• Protect the environment by not disposing of this product with household 

waste (2002/96/EC). Check your local authority for recycling advice
and facilities.

Note:

 To avoid moisture in the battery 

compartment, replace the battery compartment 
door after replacing batteries. Tighten the screws 
in the battery compartment door with a Phillips 
screwdriver. Make sure the battery compartment 
door is fully assembled, according to these 
instructions, when using this toy in water.

Содержание Sail 'n Float Boat M0252

Страница 1: ...nstruction sheet for future reference as it contains important information Requires two AA batteries included for operation Adult assembly is required for battery replacement Tool required for battery replacement Phillips screwdriver not included ...

Страница 2: ...mend replacing the batteries that came with this toy with two new AA LR6 alkaline batteries Locate the battery compartment on the bottom of the toy Loosen the screws in the battery compartment door with a Phillips screwdriver Remove the battery compartment door Remove the exhausted batteries and throw them away Insert two AA LR6 alkaline batteries Hint We recommend using alkaline batteries for lon...

Страница 3: ...Do not play with this toy on surfaces that can be damaged by water Protect these play surfaces After each use drain and rinse this toy Dry thoroughly before storing Wipe the toy and figures with a clean cloth dampened with a mild soap and water solution This toy has no consumer serviceable parts Do not take this toy apart ...

Страница 4: ...e complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation ICES 003 This Class B digital apparatus complies with Canadian ICES 003 Operation is subject to the following two conditions 1 this device may ...

Отзывы: