11.0
Operation and Adjustments
73
To Re-attach Harness Strap:
Re-attach the Harness Straps at the required
height by securing the Harness Straps into the
Harness Straps slots in the Back Support.
a. Rotate the Metal Harness Retainer and
Harness Strap to position the narrow side
of the Metal Harness Retainer into the
Harness Slot in the pad.
b. Slide the Metal Harness Retainer through
the Harness Slot opening in the seat pad.
c. Slide the Metal Harness Retainer into the
Harness Slot opening in the Back Support.
d. Pull the Metal Harness Retainer through the
seat support, position the metal Harness
retainer flat against the back surface of the
Back Support and pull on the Harness to
remove all slack.
e. Check that the Metal Harness Retainer is
flat against the surface of the Car Seat
Repeat above steps for second Harness
Strap. Be sure both Metal Harness Retainer
are properly positioned flat against the
Back Support and the Harness Straps
are not twisted.
f. Slide back support pad over top corners
of Back Support.