8
Label Application
Handle
Place Center of
Label Here
Center of Label
• Before applying the label, wipe the surface of the handle with
a clean, dry cloth to remove any dust or oils.
• Remove the backing from the label.
• First, position the center of the label on the handle, as shown.
Then, smooth each end of the label outward to attach it to
the handle.
• For best results, avoid repositioning a label once it has been
applied to the handle.
Ride-on Rocker
• Insert the base/handle pin through one wheel retainer, a hole in
the front wheel and into the other wheel retainer.
• Push the handle pin to
“snap” it into place.
Pull on the handle
pin to be sure it is secure.
Wheel Retainer
Front Wheel
Wheel Retainer
Base/Handle Pin
IMPORTANT!
Be sure to adjust the seat in the most forward
position for Ride-on Rocker mode.
