8
No status light
No power
Make sure power fl ow to the wall outlet
to
charger
is
“ON”.
Loose
connections
Check connections of all plugs. Make sure
the charger connector is tightly plugged
into the battery connector and the power
cord connector is tightly plugged into both
the charger and the wall outlet.
Bad
charger
There is no sure way to tell if your charger
is working unless you have a volt meter.
If you suspect there is a problem with
your charger, contact Power Wheels
®
Consumer Relations.
Wrong
battery
This charger is intended for use
only
with a Power Wheels
®
6-volt lead
acid battery.
Flashing red
Loose connections
Check connection of all plugs. Make sure
status light
the charger connector is tightly plugged
into the battery connector and the power
cord connector is tightly plugged into both
the charger and the wall outlet.
Undercharged
Battery needs a 100% (solid green)
battery
charge every other use.
Battery
dead
Replace battery with a new,
Power Wheels
®
6-volt lead acid battery.
Solid red
Undercharged
Charge battery 100% (solid green) or
status light
battery
Ready for Use (fl ashing green).
Problem Possible
Cause
Solution
PROBLEMS AND SOLUTIONS
