• While holding the spoiler in place, turn the vehicle on
its side.
• Insert four #10 x 1" screws through the vehicle and into
the spoiler.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
5
• Insert five #8 x
7
/
8
" screws into the holes in the top side
of the vehicle body, as shown.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
6
• Fit the spoiler onto the top back end of the vehicle.
Assembly
10
Spoiler
7
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• Insert the straight end of the steering column between
the steering linkage assembly and the vehicle body,
through the slot in the vehicle wall and out through the
hole in the dashboard.
8
Steering Column
Steering Linkage
Assembly
Hole