• Insert the left handlebar into the holes in the
headlight assembly.
• Align the holes in the left handlebar and headlight assembly.
• Insert two screws into the headlight assembly and hand
tighten. DO NOT fully tighten these screws. These screws
will be fully tightened in Assembly Step 19.
• Fit the power button covers together. Insert a screw into
the power button cover.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• Insert the power button harness plug down through the
top hole only in the headlight assembly.
• Insert the right handlebar through the top and bottom
hole in the headlight assembly.
• Make sure the power button harness is not through
the bottom hole in the headlight assembly.
• Insert two screws into the headlight assembly and hand
tighten. DO NOT fully tighten these screws. These
screws will be fully tightened in Assembly Step 19.
10
8
6
5
7
Assembly
Power Button Covers
Right Handlebar
Bottom Hole
Headlight Assembly
Top Hole
Power Button
Harness
Left Handlebar
Hole
Hole
Headlight Assembly
Headlight
Assembly
DO NOT
Fully
Tighten
DO NOT
Fully
Tighten
