Before you begin, take note!
• Please keep this manual for future reference, as it contains important
information.
• Adult assembly is required to install batteries.
• Tool needed for battery installation: Phillips screwdriver (not included).
• Requires four “AA” (LR6)
alkaline
batteries for operation (not included).
• Replace batteries when:
- Display on the screen becomes difficult to see.
- Toy functions erratically.
- Sounds become faint or there are no sounds at all.
•
Use only
the drawing stylus on the screen.
Never
use any other object,
such as a regular pen or pencil, on the screen. Markings from regular
pens or pencils cannot be removed and will damage the screen.
• Use the cartridge adaptor with any Pixter® black and white software
cartridge (sold separately). Note that the display
will still be black
and white only!
• Be sure to turn Pixter® power off before inserting a software cartridge
(sold separately) into the software port. Turn Pixter® power back on
to play!
• If Pixter®
seems to be operating erratically (and you have recently
changed the batteries), you may need to reset it. Open the battery
compartment door on the back of the unit. Remove and replace the
batteries. Replace the battery compartment door.
4
