Assembly
Broken Edges
Break-Away
Fence Pieces
Roll-Over Mountain Track
Curved
Pond
Track
• Align the six tabs on the roll-over mountain track with the six slots in the top surface of the base track. Press down on the roll-over
mountain until the tabs "snap" into the slots in the top surface of the base track.
• Position the break-away fence pieces so that the “broken” edges face each other. Fit the ends of the break-away fence pieces into
the holes in the top surface of the roll-over mountain track.
• Fit the pegs on the alligator head into the slot in the curved pond track. Push the alligator head back to "snap" it into place.
4
Base Track
Slot
Slots
Pegs
Slots
Tabs
6
IMPORTANT! Attaching the roll-over mountain
track is a one-time assembly. You will not be able
to remove the roll-over mountain track once it is
assembled. Make sure you have assembled the
bridge and gate before attaching the roll-over
mountain track.
Slots
Holes
Peg
Holes
Alligator
Head
• Fit the pegs on the log into the grooves in the curved pond track. Press down on the log to "snap" it into place.
• Fit the peg on the bottom of a barrel into the hole in the large curved track. Push the barrel down to “set” it. Repeat this procedure
to attach the other barrel.
8
Large Curved Track
Barrel
Grooves
Log
Peg
Peg
Curved
Pond
Track
