Battery Installation
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
1.5V x 3
“AA” (LR6)
Battery Safety Information
• Locate the battery compartment on the bottom of the toy.
• Loosen the screw in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds become faint or stop, it’s time for an adult to change the batteries!
• Slide the power switch on or off.
• Protect the environment by not disposing of this product with household
waste (2002/96/EC). Check your local authority for recycling advice
and facilities.
On/Off
