2
3
3
Proper label application will help to keep the label looking
its best!
• Carefully peel a label from the label sheet and attach it to
the backboard, as shown.
• Smooth out the label to remove any air bubbles.
• Repeat this procedure to apply the remaining labels to
the backboard.
Backboard
Assembly
• Place the loops at the top of the net into the grooves on
the ring.
• Pull each loop through a ring tab, as shown.
• Place the rim on a flat surface with the rectangular tabs
facing up.
• Locate the four holes in the underside of the net assembly.
Align the four holes in the underside of the net assembly with
the four holes in the rim.
• Place the net assembly onto the rim.
Ring
This product contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
1
Label
Ring Tab
Rectangular
Tabs
Rim
Holes
Net Assembly
1
2
3
4
