Battery
Replacement
Battery Safety
Information
For best performance, we recommend replacing
the batteries that came with this toy with three,
new alkaline “AA” (LR6) batteries.
• Locate the battery compartment on the bottom
of the toy.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Remove the exhausted batteries and throw
them away.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screws with a Phillips screwdriver.
• If this toy begins to operate erratically you
may need to reset the electronics. Slide the
power/mode switch off and then back on.
• When sounds or lights from this toy
become
faint or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with household
waste (2002/96/EC). Check your local
authority for recycling advice and
facilities (Europe only).
1.5V x 3
“AA” (LR6)
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-
use. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
