Battery Replacement
• For longer life, use
alkaline
batteries.
• Loosen the screw in the battery compartment
door and remove the door. Remove the
exhausted batteries and properly dispose.
• Insert two, new AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power switch off and back on.
Assembly
• Place the toy back side down on
a protected surface.
• Fit the sidewalk to the bottom side of the toy.
• Insert three screws into the sidewalk and
tighten with a Phillips screwdriver. Do not
over-tighten.
• Turn the toy over.
• Fit the stairs to the bottom side of the toy.
• Insert three screws into the stairs and tighten
with a Phillips screwdriver. Do not over-tighten.
CAUTION
This package contains small parts.
For adult assembly only.
M3,5 x 12 mm Screw - 6
Show Actual Size
1
2
• Lift the elevator to the top floor to access the
battery compartment.
• The battery compartment is located on the
bottom side of the elevator.
Protect the environment by not
disposing of this product or any
batteries with household waste. This
symbol indicates that this product shall
not be treated as household waste.
Check your local authority for recycling
advice and facilities.