6
Assembly
Tab
Ramp
• Align the tabs on the edge of the castle with
the slots in the ramp.
• Fit the tabs into the slots and press firmly
on the castle to
“snap”
the ramp in place.
• Position the castle so the bottom is facing you.
• Insert two screws through the holes in the
ramp. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Post
6
• Fit a fence post over a matching peg on the
bottom of the toy as shown.
• Insert a screw through the post and into the
peg. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other
three fence posts.
7
Bottom View
Bottom View