P5064-0920
BOTTOM
VIEW
12
ASSEMBLY
F
P5064pr-0920
10
11
• Slide a
7
/
16
" washer onto the short end of each front axle.
• Fit the steering linkage cover onto the front axles, as shown.
Front
Axle
Front
Axle
Steering
Linkage
Cover
7
/
16
"
Washer
7
/
16
"
Washer
• Fit a .437 cap nut onto the end of a front axle.
• Tap the cap nut with a hammer to secure it to the end of the
front axle.
• Repeat this procedure to fasten another .437 cap nut to the other
front axle.
Front Axle
.437
Cap
Nut
• Slide a
7
/
16
" washer onto a front axle.
• Slide a bushing,
ring side first
, onto a front axle.
7
/
16
" Washer
Front Axle
Bushing
(Ring Side First)
• Turn the vehicle so that the front end is toward you.
• Fit the steering linkage assembly to the front end of the vehicle.
• Insert two #12 x 1
1
/
4
" screws into the holes in the steering
linkage assembly. Tighten the screws.
• Pull the steering linkage to be sure it is secure. If it is not secure,
tighten the screws a few more turns.
12
Steering Linkage
Assembly
Ring Side
First
13
.437
Cap
Nut
