Assembly
1
4
• Locate the connector coming from underside of the chair bottom.
• Insert the connector into the socket on the table leg, as shown.
1
7
• Press down firmly to
“snap”
the table top onto the table base.
Note:
This may require some force.
1
9
• Fit the connector cover onto the back of the table base,
as shown.
• Insert two screws into connector cover. Tighten the screws.
1
6
• Insert two screws through the table base into the leg. Tighten
the screws.
1
8
• Locate the connector coming from the table base.
• Insert and
“snap”
the connector into the socket on the
underside of the table top.
• Tuck the excess wire from the connector back down into the
opening in the table base.
Assembly is now complete.
Table Top
Connector
1
5
• Slide the table base onto the chair assembly, as shown.
Table Base
Socket
Connector Cover
Connector
Back View
Back View