7
Convert from Lay & Play to Sit-At Play
• While pushing the latches toward the unlock
position , lift to remove the puppy house from
the arches.
1
1
• Remove all six straps on the
quilt from the slots in the
supports and arches.
• While pushing the latch
toward the unlock position ,
lift to remove the arch from
the support.
• Repeat this procedure to remove the other arch.
1
2
• Rotate the end of each support so that it forms
a right angle.
1
3
• Position both supports along one edge of the quilt,
as shown.
• Fit the straps on the ends of the quilt through the
slots in the supports. Make sure that the end of each
strap forms a “T” under the support.
• Pull up on the quilt to be sure it is secure to
the supports.
•
“Snap”
the puppy house onto the supports.
• To convert back to Lay & Play, first remove the puppy
house from the supports. While pushing the latches
toward the unlock position , lift to remove the puppy
house from the supports. Remove the quilt from the
supports and rotate the supports back to the straight
position. Follow the Lay & Play setup instructions.
1
4
