4
Assembly
• Place the seat bottom face down on a fl at surface.
• At an angle, fi t the footrest to the seat bottom, as shown.
Seat Bottom
Footrest
• Slide a seat bottom tube through each set of plastic
rings on the seat bottom.
Plastic Rings
Seat Bottom Tubes
Plastic Rings
IMPORTANT!
Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts
or sharp edges. DO NOT use if any parts are missing
or broken. Contact Mattel for replacement parts and
instructions if needed. Never substitute parts.
• Align the holes in the plastic rings and the seat
bottom
tubes.
• Insert a #8 x 1,9 cm screw through each plastic ring and
into the seat bottom tubes, as shown. Tighten the screws.
This may require extra force.
• Push the seat bottom tubes back and forth to be sure they
are secured to the seat bottom. If the seat bottom tubes
move, you have probably not fastened them properly.
Remove the screws and check to be sure the screw holes
in the seat bottom tubes and seat bottom plastic rings are
aligned. Replace and tighten the screws.
11
1
2
1
3
