2
• Position the wires with the toy bases down.
Hint:
You may need the help of another adult to steady
the wires to complete this assembly step.
• Position the base with the ribs facing up. Fit the base
grooves to the flat end of each wire.
Hint:
There is a left and right wire. The wires are designed
to fit the base one way. If a wire does not fit on one side of
the base, remove it and try fitting it to the other side of
the base.
IMPORTANT!
Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions if
needed. Never substitute parts.
3
Base
Wires
Groove
Groove
Assembly
Mobile Ring
Mobile
• Rotate the mobile up, as shown.
• Fit the mobile ring onto the top of the mobile.
• While holding the mobile, push the mobile ring until it
“snaps”
into place.
• Rotate the mobile down.
1
