background image

2

Prevent serious injury or death from falls 
or sliding out:

•  

 

The child should at all times wear a safety 

harness correctly fitted and adjusted. The tray 
is not designed to hold the child in the chair.

• It is recommended that only children capable 

of sitting upright unassisted use the high 
chair in the upright position.

• Always keep child in view while in the 

high chair.

• Never leave child unattended.
• Do not use the high chair unless all compo-

nents are correctly fitted and adjusted.

Prevent injury from burns:

 Do not place this 

high chair near open fires or any hot surfaces.

WARNING

CAUTION

This package contains small parts in its 
unassembled state. Adult assembly is required.

2

Consumer Information

IMPORTANT! 

Place the high chair on a level, stable surface away 

from electrical flexes. Be sure to keep electrical flexes out of 
child's reach.

•  Please read these instructions before assembly and use of 

this product.

•  Adult assembly is required.
•  Tool needed for assembly: Phillips screwdriver (not included).
•  Product features and decorations may vary from photographs.
•  

GREAT BRITAIN

Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. 
Helpline: 01628 500303; www.service.mattel.com/uk.

Содержание Healthy Care B8866

















Отзывы: