7
P5065a-0920
BATTERY CHARGING
• Fit the charger connector and the battery connector together
A
.
• Plug the charger into a standard wall outlet
B
.
Notes:
–
If power flow to the wall outlet is controlled by a switch,
make sure the switch is ON.
– Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
•
Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery after each use of your vehicle for at least
14 hours. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the
wall outlet. The battery is now ready to be installed in your
vehicle. If your battery is already installed in your vehicle, simply
re-connect the battery connector and motor connector. Replace
the battery retainer and the seat.
Battery
Connector
Charger
Connector
B
A
1
• Loosen the screws on each side of the seat. Set the
screws aside.
• Pull the tabs on each side of the seat and lift to remove it.
Seat
2
• Loosen the screw in the battery retainer and remove it. Set the
screw aside.
• Remove the battery from the battery compartment.
Battery Retainer
Содержание Harley-Davidson ROCKER P5065
Страница 21: ......