• Lift the flip-out handle on the bottom of the toy to access the
battery compartment.
• Locate the battery compartment on the bottom of the toy.
• Loosen the screws in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
• Insert three "AA" (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer life.
• Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Battery Installation
Battery
Compartment
Door
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in
a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
1.5V x 3
“AA” (LR6)
Shown Actual Size
-
+
