• Position the handle support so
the pegs are facing you.
• With the checkered side facing
down, fit the double flag on to
the pegs on the handle support.
6
• Fit the handle onto the handle
support as shown.
Assembly
2
3
1
Pegs
Double
Flag
Handle
Support
Handle
Support
Handle
WARNING
This product contains small parts in its unassembled
state. Adult assembly is required.
• Insert three screws through
the holes in the handle and
into the handle support. Tighten
the screws with a Phillips
screwdriver. Do not over-tighten.
