Label Decoration
Assembly
• Position the base so that the pond or front end is toward you.
• Insert and snap the hooked tabs on the rear right trunk and
rear left trunk into the slots in the rear of the base.
• Pull up on the trunks to be sure they are secure.
1
• Insert and snap the hooked tabs on the front right trunk and
front left trunk into the slots in the front of the base.
• Pull up on the trunks to be sure they are secure.
Helpful Hint:
Turn the base assembly over to make sure the
hooked tabs on the trunks are snapped into the base (see inset).
2
3
Proper label application will help to keep the labels looking
their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe this product with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, do not attempt to apply a label more
than once.
• Apply the labels as shown in the illustration.
Rear
Right
Trunk
Rear
Left
Trunk
Pond
Front
Right
Trunk
Front
Left
Trunk
Base
Base
3
2
4
1
5
6
7
8
Hooked Tab
