Fork Post
Fork Covers
• Insert the fork post up through the hole in the neck of
the frame. Make sure the fork is positioned so that the
fork covers face the rear wheels.
REAR OF
TRIKE
• Fit the handlebar front to the fork post.
Hint:
The handlebar front is designed to assemble to
the fork post one way.
• Fit the handlebar back to the fork post and handlebar
front. Hold them together fi rmly.
• First, insert the remaining #8 x ¾" screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2¼" screw through the center
hole in the handlebar back and tighten.
Handlebar Front
¾" Screw
¾" Screw
2¼" Screw
Handlebar Back
9
10
Fork Post
5
• Wipe the vehicle with a clean, dry cloth to remove any
oils before applying labels.
• Apply labels exactly as shown in the illustrations. For
best results, avoid repositioning the label after it has
been applied.
• Starting at the center of a label rub fi rmly with a dry
cloth, and smooth towards the outer edges to remove
air bubbles.
Right Side
7
8
4
3
Left Side
6
3
5
2
1
Label Decoration
Assembly
