4
Assembly
• Fit the tabs on the tower into the slots in the
base. Push to "
snap
" the tower in place.
• Fit the tabs on the upper ramp into the slots
in the lower ramp.
• Insert two screws into the upper ramp.
Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Repeat this procedure to assemble the other
upper and lower ramps.
Base
Upper Ramp
Lower Ramp
Tower
Roof
1
3
4
• Fit a ramp onto each side of the tower.
• Fit the tabs on the roof into the slots on the
tower. Push to "
snap
" the roof in place.
3
2
