Battery Installation
2
Remote Controller
• Locate the battery compartment on the bottom
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
“AAA” (LR03)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• If the remote controller begins to operate erratically, you may
need to reset the electronics. Remove the batteries
and replace them in the remote controller.
1.5V x 6
“AAA” (LR03)
We recommend the use of
alkaline
batteries for longer battery life
.
IMPORTANT!
Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
Vehicle
• Loosen the screws in the bottom of
the vehicle with a Phillips screwdriver.
• Lift the top of the vehicle off of the
chassis to access the battery
compartment. Insert three “AAA”
(LR03)
alkaline
batteries.
• Replace the top of the vehicle and
tighten the screw with a Phillips
screwdriver. Do not over-tighten
• If the vehicle begins to operate
erratically, you may need to reset the
electronics. Remove the batteries and replace them in the toy.
• Please keep this instruction sheet for future
reference, as it contains important information.
• Requires six “AAA” (LR03)
alkaline
batteries
(not included).
• Adult assembly is required for battery installation.
• Tool required for battery installation: Phillips
screwdriver (not included).
Содержание GEOTRAX T7161
Страница 1: ...www fisher price com T7161...